In ideal plywood, core layers should be visibly running as parallel straight lines as shown :
In ideal plywood, core layers should be visibly running as parallel straight lines as shown :
At Avron Ply, we are committed to transforming the plywood landscape of India by pushing for ever more transparency across the value chain in the plywood industry. This helps solve three of the biggest challenges we are trying to tackle daily at Avron.
Quality Verification
Price Discovery
Sustainability
We’ll try and shed some light on the issue of Quality here to make sure you know what you should be looking for, next time you go buying plywood for your home.
When it comes to quality checking, one can easily do a 5-minute visual inspection to ascertain whether a plywood panel is of genuine good quality or not. We have to stress the fact that passing these basic checks does not mean that the plywood meets the exact standards required for any industrial or technical application. It only means that the plywood is fit for basic furniture usage and will serve its purpose in most home applications.
At Avron Ply, we are committed to transforming the plywood landscape of India by pushing for ever more transparency across the value chain in the plywood industry. This helps solve three of the biggest challenges we are trying to tackle daily at Avron.
Quality Verification
Price Discovery
Sustainability
We’ll try and shed some light on the issue of Quality here to make sure you know what you should be looking for, next time you go buying plywood for your home.
When it comes to quality checking, one can easily do a 5-minute visual inspection to ascertain whether a plywood panel is of genuine good quality or not. We have to stress the fact that passing these basic checks does not mean that the plywood meets the exact standards required for any industrial or technical application. It only means that the plywood is fit for basic furniture usage and will serve its purpose in most home applications.
Core Gaps & Overlappings
Have the seller cut a piece from a sample sheet(most good dealers already have cut sample sheets for display) to see if the core lines visible on the outside are also congruent inside. There may be some core gaps and overlapping involved and that’s okay since plywood in India is still largely a manual process but if there’re more than 2 -3 core gaps & overlappings, you should probably abort.
Core Overlapping can be identified as above. 1 – 2mm long overlappings are alright but longer or too many instances are not.
Check the side profile of the ply and the edges. The layers on the side profile of plywood should be running straight. Since plywood is an engineered wood panel made by pressing layers of thin wood veneers together, it’s the construction/ composing of these layers on top of each other which determines the quality of plywood. The core layers should be visible as straight lines without gaps/holes and much overlapping between layers. These layers of the core are not one whole sheet of 8×4 size but of smaller 4×2 or 8×2 sizes which are joined and then composed on top of each other at right angles. Therefore there are bound to be some minimal amount of core gaps or overlapping which are acceptable. A couple of core gaps or overlappings of 1 – 2 mm per layer is acceptable but anything exceeding that may compromise the structural integrity of the plywood.
Core Gaps & Overlappings
Have the seller cut a piece from a sample sheet(most good dealers already have cut sample sheets for display) to see if the core lines visible on the outside are also congruent inside. There may be some core gaps and overlapping involved and that’s okay since plywood in India is still largely a manual process but if there’re more than 2 -3 core gaps & overlappings, you should probably abort.
Core Overlapping can be identified as above. 1 – 2mm long overlappings are alright but longer or too many instances are not.
Check the side profile of the ply and the edges. The layers on the side profile of plywood should be running straight. Since plywood is an engineered wood panel made by pressing layers of thin wood veneers together, it’s the construction/ composing of these layers on top of each other which determines the quality of plywood. The core layers should be visible as straight lines without gaps/holes and much overlapping between layers. These layers of the core are not one whole sheet of 8×4 size but of smaller 4×2 or 8×2 sizes which are joined and then composed on top of each other at right angles. Therefore there are bound to be some minimal amount of core gaps or overlapping which are acceptable. A couple of core gaps or overlappings of 1 – 2 mm per layer is acceptable but anything exceeding that may compromise the structural integrity of the plywood.
Nail Holding Capability
The performance of any ply is predicated on its nail-holding capability. A well-bonded ply would never split or crack easily when a nail or screw is hammered into it. If it does, the ply would probably pose the risk of delamination and cracking at all nailing points which renders the furniture useless. To check this, drive a nail from the side into the ply. If the layers split or crack, you should probably look for a better ply. ( #14 1.5-inch nails should do the trick for this purpose.)
Weight
Higher the weight of the ply, the better its density, and therefore better its strength and performance. A normal full red core plywood of Eucalyptus timber make should weigh 39+Kgs for a 19mm 8×4 Plywood Sheet. Alternate grade plywood made of alternate layers of Eucalyptus and Poplar timber should weigh around 32+ for a 19mm 8x4ft Plywood Sheet.
Nail Holding Capability
The performance of any ply is predicated on its nail-holding capability. A well-bonded ply would never split or crack easily when a nail or screw is hammered into it. If it does, the ply would probably pose the risk of delamination and cracking at all nailing points which renders the furniture useless. To check this, drive a nail from the side into the ply. If the layers split or crack, you should probably look for a better ply. ( #14 1.5-inch nails should do the trick for this purpose.)
Weight
Higher the weight of the ply, the better its density, and therefore better its strength and performance. A normal full red core plywood of Eucalyptus timber make should weigh 39+Kgs for a 19mm 8×4 Plywood Sheet. Alternate grade plywood made of alternate layers of Eucalyptus and Poplar timber should weigh around 32+ for a 19mm 8x4ft Plywood Sheet.
Grade Verification
MR (Moisture Resistant)(IS – 303) – Made with Urea Formaldehyde Resin, this is the most basic grade of plywood. If it qualifies for the tests given above, it is more or less MR Grade Ply at least.
BWR (Boiling Water Resistant)(IS – 303) – Made with Melamine Bonded Urea Formaldehyde Resin, it’s more resistant to water than MR Grade. A little darker than MR Grade appearance-wise. Take a sample and submerge it in boiling water for 8 hours or in a pressure cooker for 1 whistle. Cool down by submerging in normal-temperature water. If the ply layers delaminate, it’s not BWR Grade, and vice versa.
The right side image shows a visual difference between MR Grade Plywood (Commercial IS 303) on the left and Marine Grade(Waterproof IS 710) Plywood on the right side. Marine Grade plywood is generally darker in color owing to the darker waterproof glue used in bonding as is evident in the picture above.
BWP/Marine (Boiling Water Proof) (IS – 710) – Made with Phenol Bonded Resin, this ply is manufactured to be completely waterproof. Usually dark brown/dark chocolate. Take a sample and submerge it in boiling water for 72 hours or in a pressure cooker for 7 whistles. Cool down by submerging in normal-temperature water. If the ply layers delaminate, it’s not BWP Grade, and vice versa.
Now manufacturers all over India have devised a new way of fooling customers – they dip their MR ply in dark color which gives it a look of BWP ply and then sell it at a much higher rate under the name of BWP Grade ply whereas it’s not. The only way to test it is to take a sample of this Marine Grade Ply, put it in boiling water in a pressure cooker, and wait for 7 whistles. Post that if the core layers split up, it’s not a BWP-grade ply.
Grade Verification
MR (Moisture Resistant)(IS – 303) – Made with Urea Formaldehyde Resin, this is the most basic grade of plywood. If it qualifies for the tests given above, it is more or less MR Grade Ply at least.
BWR (Boiling Water Resistant)(IS – 303) – Made with Melamine Bonded Urea Formaldehyde Resin, it’s more resistant to water than MR Grade. A little darker than MR Grade appearance-wise. Take a sample and submerge it in boiling water for 8 hours or in a pressure cooker for 1 whistle. Cool down by submerging in normal-temperature water. If the ply layers delaminate, it’s not BWR Grade, and vice versa.
The right side image shows a visual difference between MR Grade Plywood (Commercial IS 303) on the left and Marine Grade(Waterproof IS 710) Plywood on the right side. Marine Grade plywood is generally darker in color owing to the darker waterproof glue used in bonding as is evident in the picture above.
BWP/Marine (Boiling Water Proof) (IS – 710) – Made with Phenol Bonded Resin, this ply is manufactured to be completely waterproof. Usually dark brown/dark chocolate. Take a sample and submerge it in boiling water for 72 hours or in a pressure cooker for 7 whistles. Cool down by submerging in normal-temperature water. If the ply layers delaminate, it’s not BWP Grade, and vice versa.
Now manufacturers all over India have devised a new way of fooling customers – they dip their MR ply in dark color which gives it a look of BWP ply and then sell it at a much higher rate under the name of BWP Grade ply whereas it’s not. The only way to test it is to take a sample of this Marine Grade Ply, put it in boiling water in a pressure cooker, and wait for 7 whistles. Post that if the core layers split up, it’s not a BWP-grade ply.
Timber Species
Prefer Eucalyptus-made plywood over Poplar or Gurjan timber-made plywood. Poplar is much softer and weaker than Eucalyptus and is generally susceptible to Borer & Termite Infestation. There is an Indian myth that Gurjan is the best wood for plywood which falls through when you take into consideration Cost vs Performance vs Environmental Impact.
As the above image shows, Gurjan Timber is generally darker & has a more granular texture which can be spotted in the cross-section of layers while Eucalyptus has a much smoother finish.
Performance: Eucalyptus-made plywood has identical strength, density & performance capability as Gurjan-made Plywood. Poplar-made plywood has inferior performance levels than both.
Environmental Impact: The more important reason for choosing Eucalyptus over Gurjan is the fact that Eucalyptus is a fast-growing timber species that are cultivated and grown in managed forests and therefore does not contribute towards any deforestation. On the other hand, Gurjan is a slow-growing timber species usage which directly results in deforestation and therefore is NOT Sustainable.
Cost: If that wasn’t reason enough, Gurjan-made plywood is at least 50% more expensive than Eucalyptus made Plywood as Gurjan Timber is now only imported from Burma or Laos (Most of the Gurjan forest in India is exhausted). So instead of buying an expensive Gurjan Ply, we suggest choosing Eucalyptus core.
Timber Species
Prefer Eucalyptus-made plywood over Poplar or Gurjan timber-made plywood. Poplar is much softer and weaker than Eucalyptus and is generally susceptible to Borer & Termite Infestation. There is an Indian myth that Gurjan is the best wood for plywood which falls through when you take into consideration Cost vs Performance vs Environmental Impact.
As the above image shows, Gurjan Timber is generally darker & has a more granular texture which can be spotted in the cross-section of layers while Eucalyptus has a much more smoother finish.
Performance: Eucalyptus-made plywood has identical strength, density & performance capability as Gurjan-made Plywood. Poplar-made plywood has inferior performance levels than both.
Environmental Impact: The more important reason for choosing Eucalyptus over Gurjan is the fact that Eucalyptus is a fast-growing timber species that is cultivated and grown in managed forests and therefore does not contribute towards any deforestation. On the other hand, Gurjan is a slow-growing timber species usage which directly results in deforestation and therefore is NOT Sustainable.
Cost: If that wasn’t reason enough, Gurjan-made plywood is at least 50% more expensive than Eucalyptus made Plywood as Gurjan Timber is now only imported from Burma or Laos (Most of the Gurjan forest in India is exhausted). So instead of buying expensive Gurjan Ply, we suggest choosing Eucalyptus core.
You can easily spot whether a Plywood has Gurjan timber or Eucalyptus timber in its core. As shown in the picture on the right, Gurjan timber generally is reddish brown and darker in color than Eucalyptus, plus it has a granular texture as highlighted in the picture while Eucalyptus has a much smoother finish. 90% of the plywood in the Indian market is sold under the name of Gurjan Plywood while only about 20% of them contain Gurjan Timber.
Face Finishing
The face grain/look of plywood doesn’t matter as they have absolutely no role to play in structural integrity, instead, it’s just pure aesthetics. However, as a rule of thumb, good quality manufacturers use good quality Gurjan face veneers which deliver a high-quality finish to the ply. However, on the off chance that the outside face finish is not up to the mark due to any reason, it doesn’t mean the underlying plywood is also bad. Most if not all interior designers or carpenters use a laminate or veneer to cover the plywood exposed surface, so it doesn’t matter how it looks on the face. Manufacturers can easily serve you really bad plywood decorated with a shiny face veneer to get a higher price. Therefore don’t judge plywood by its cover! What matters is that the side profile and what’s inside, so look deeper!
Face Finishing
The face grain/look of plywood doesn’t matter as they have absolutely no role to play in structural integrity, instead, it’s just pure aesthetics. However, as a rule of thumb, good quality manufacturers use good quality Gurjan face veneers which deliver a high-quality finish to the ply. However, on the off chance that the outside face finish is not up to the mark due to any reason, it doesn’t mean the underlying plywood is also bad. Most if not all interior designers or carpenters use a laminate or veneer to cover the plywood exposed surface, so it doesn’t matter how it looks on the face. Manufacturers can easily serve you really bad plywood decorated with a shiny face veneer to get a higher price. Therefore don’t judge plywood by its cover! What matters is that the side profile and what’s inside, so look deeper!